Therefore, when operating the cutting machine, it is necessary to strictly follow the use regulations, and pay attention to safety when using it. Someone should support and lift the steel bar when cutting, and the actions should be consistent during operation.
Here is an introduction to the use of the cutting machine and precautions: The movable blade moves forward and feeding is strictly prohibited. Short-cut steel bars should be clamped by casing or pliers, not for direct feeding. Operate and use the machine within a safe range to ensure the safety of personnel. It is strictly forbidden to directly clear the short head and debris near the knife edge during the machine operation.
There should be a discharge table next to the cutting machine.When using the fishing rod equipment cutting machine for material cutting, you need to operate in accordance with its use regulations. The cutting material shall not exceed the load capacity of the machine. The material can be cut after the machine is running normally.
Operators are not allowed to stay
carp terminal tackle within the swing range of the steel bar and near the knife edge. The distance between the hand and the knife edge should not be less than 15cm. When cutting special steel bars such as low alloy steel, high hardness blades should be used.
PR
